Filter
Top Products
16 VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
STEP 3: CALIBRATE THE SCANNER
1. After the computer loads the appropriate software to run the
scanner, the Found New Hardware Wizard window opens.
2. You will need the calibration page that you received with your
scanner for the calibration process. The calibration page is in a
plastic storage bag. Remove the calibration page from its plastic
storage bag.
3. Before you start the calibration, please move the scanner’s Paper
Return into the Up position so the calibration page will feed
straight through the scanner.
4. Now click Next on the Found new Hardware Wizard window.
Move the Paper Return
to the Up position.
The Calibration Page.