Filter
Top Products
14
U N P A C K I N G A N D M O U N T I N G T H E I N T E R A C T I V E P E N D I S P L A Y
When unpacking the Cintiq 18SX Interactive Pen Display, place the display unit face down on a
flat, soft surface (such as on a cloth spread across a desktop) and remove any packing materials
that may protect the display unit cabling.
To mount Cintiq on the stand:
■ Make sure the stand is stable on your desktop or other work surface and will not tip or fall
when Cintiq is mounted on it. Securely grasp Cintiq with both hands so that the display faces
toward you, with the power switch and LEDs at the top right corner.
Align Cintiq parallel to the front of the stand so that the bearing hub is located between the
V-shaped upper edges of the stand’s bearing recess. See A (The V-shaped edges of the stand
will serve as a guide for positioning the bearing hub.)
■ With the back of Cintiq resting against the stand, lower Cintiq until the bearing hub rests
securely in the bearing recess of the stand. See B The display unit will be held in place by
gravity; there will be no audible ‘snap’ that indicates a mechanical lock.
Note: To lock Cintiq in a landscape or portrait orientation, or to learn about other mounting
options, see Optional Display Configurations, on page 53.
Bearing Hub
A
Bearing Recess