Filter
Top Products
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
a page if a page format change code has been placed before the
font change.
Blanks, margin settings, and SCS commands are not treated as
printable characters.
Remember Discrepancies between the logical page commands (MPP, MPL)
and the physical page size (A4, orientation, etc.) may result in
printing problems.
Page Orientation algorithm
Page orientation commands define the orientation of the printed
pages. The final orientation of the output depends on the
factors listed by priority below:
• If a Host Orientation command was received
• If Auto Tray Orientation was selected
• The default orientation of the current tray
• If the page size parameters are valid
• If draft or letter quality was selected.
For all coax printer emulations, the print quality is always draft.
Draft is the default at power up.
Tray orientation can be portrait, landscape, and Computer
Output Reduction (COR). COR is a reduced size copy of the
printed output.
The characteristics of COR are as follows:
• Landscape orientation
• A 70% reduction in the size of the logical page that is
accomplished by:
— Substituting smaller fonts:
– 14 pitch for 10 pitch fonts
– 15 pitch for 12 pitch fonts
– 20 pitch for 15 pitch fonts
– 27 pitch for 17 pitch fonts
— Reducing vertical line spacing to 70% of full size
— 0.5-inch top and left margins.
The COR fonts may be cross referenced with the full sized fonts
listed in the Font and Character Set tables in the “Font support
and selection” chapter.
3-66 XEROX MRP FAMILY COAX COMMAND REFERENCE