Filter
Top Products
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Y50—FF After Time Elapse
@Y50, n@
Flushes the page if unprinted data remains in the print buffer for
a specified elapsed time. This function has effect as soon as the
command is received.
n Values for n are:
0* Do not flush page
1 to 255 Flush page after x seconds.
Make sure that this function is set to a value longer than is
required for the system to generate and send the next buffer. In
general, the host application generates a termination form feed
and you need not change this function.
In Duplex mode, a command for select next page will be issued.
Example @Y50, 10@ sends Form Feed after 10 seconds if data remains in
print buffer.
Y51—User Strings at Power Up
@Y51, <string number>@
Specifies the user strings that should be sent at power up.
0 to 7 One or more strings stated in the form (n1), (n2),
. . . .(nx) in ascending order.
Remember • The string has to be defined in function Y61—Setup for User-
defined Strings before it is sent by function Y51.
• The interface may overwrite some of the settings set in the
user string at power up.
• The user string should not conflict with the IBM setup string
defined in function Y62
• The strings are sent in ascending order.
Example @Y51, 2, 5@ sends user strings 2 and 5 to the printer after FSL
Y61 defines the string.
XEROX MRP FAMILY COAX COMMAND REFERENCE 3-41