Filter
Top Products
OVERVIEW AND PRINTER SETUP
If coax jobs are printed from Tray 5, set the “Tray 5 Size Setup”
option to a size supported by the Xerox MRP Family PCL
emulation only. This also applies to the manual settings of the
other paper trays. The 11 standard size paper stocks and
envelopes are documented in the "Print language setup menu"
section of the System Administrator Guide.
Refer to the Xerox MRP Family System Administrator Guide for a
description of the parameters in the printer setup.
Print Language Setup - HP LaserJet Emulation Mode
The “Font” selection does not determine the default font for
coax printing. The interface cards send PCL font characteristics
that best match the IBM fonts and select an internal PCL font or
3816 emulation font accordingly. The default font is changed
using specific FSL commands described in this manual.
For the duplex capability and setup functions, refer to the Xerox
MRP Family System Administrator Guide. If banner sheets are
enabled, job data may print on the back of the banner sheets or
vice versa.
There are three methods to change the input paper tray. Refer
to the “Function Selection via Line (FSL) commands” chapter.
The “Input Tray to Command Assignment“ selection maps the
PCL paper source command numbers (not tray numbers) to
other trays. This allows you to map most of the PCL source
commands sent by the interface cards to select a paper tray that
is different than the default. An example is to change the default
paper feed from Tray 1 to the high-capacity feeder Tray 4.
However, you can no longer access input Tray 1 for jobs from
coax interface or in PCL. In addition, the printer PCL5 driver
does not appear to function correctly when you try to use it.
The preferred method is to utilize the Configuration and
Resource Utilities for selecting a default tray.
Printing 132 characters by 66 lines landscape with Xerox 3816 font (FONT0204)
1. Download the Xerox 3816 font named "FONT0204".
2. Create a configuration description for a 132 character MPP
and a 66 line MPL. Refer to Chapter 3 for more information
on setting MPP and MPL.
3. Create a user-defined FSL file/member that contains one of
the following:
For 8.5" x 11" paper use:
&&??@@Y96,204@
&&??@@Y62, 104, 1B, 28, 32, 30, 32, 30, 34, 58, 1B, 26, 6C, 31, 6F, 35, 2E, 34 35, 43@
&&??<space>
1-4 XEROX MRP FAMILY COAX COMMAND REFERENCE