Filter
Top Products
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Table 3-2. FSL Commands (continued)
FSL Command name
X4 Restore Settings from Permanent Storage
Y1 Set IBM Buffer Size
Y2 Set Default LPI
Y3 Set Default CPI
Y4 Set Default Line Spacing (single/double)
Y5 Set Default Maximum Page Length (MPL)
Y6 Set Default Maximum Print Position (MPP)
Y7 Set Case (mono, dual)
Y8 Set LU1 Language
Y9 Set Default Print Quality
Y10 Set Page Format
Y11 Set Default Paper Path
Y12 Set Default Paper Size
Y13 Set Wrap/Cut Option at Physical Paper Size
Y14 Enable Graphic Option
Y19 Set Simplex / Duplex
Y25 FF Before Local Copy
Y26 FF After Local Copy
Y27 Non-SCS Print Image
Y28 Non-SCS, CR at MPP + 1
Y29 Non-SCS, NL at MPP + 1
Y30 Non-SCS, Valid FF Followed by Data
Y31 Non-SCS, Valid FF at End of Print Buffer
Y32 Non-SCS, FF Valid
Y33 Non-SCS, Automatic Function at End of Job
Y34 Last LF on Page Sent as FF
Y36 Suppress IBM Control Code
Y37 IBM Printer Emulation Select
Y38 IBM Communication Feature, (Query, EAB)
3-6 XEROX MRP FAMILY COAX COMMAND REFERENCE