Filter
Top Products
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Example @Y37, 0@ sets 3287 VCS emulation.
Refer to the “Helpful hints” appendix for recommended settings
to obtain a specific IBM printer emulation.
Y38—IBM Communication Feature (Query, EAB)
@Y38, n@
Enables query reply.
n Values for n are:
0 Extended Attribute Buffer (EAB) but No
Query Reply
1* EAB and Query Reply enabled
2 No Query Reply and No EAB support
This function is only read at power up.
Example @Y38, 0@ disables query reply.
Refer to the “Helpful hints” appendix for recommended settings
to obtain a specific IBM printer emulation.
Refer also to the “Query replies” appendix that explains in detail
the available Query Replies available on the interface.
For this FSL Y38 function, refer to the “Printer Features,”
“Features,” and “Extended ID” functions of the Printer Output
Area (table D-2) in the “Coax communications buffer” appendix.
Y44—Suppress CR and SP to Same Position
@Y44, n@
Selects suppression of Carriage Returns (CRs) and Spaces (SPs).
n Values for n are:
0 No suppression
1* Suppression.
This function should be set to 1 if font downloading or escape
sequences are being sent without the Special Transparent
Feature, Multiple Paired Hex Transparent (ESC ESC) notation.
This function is used when transparent data to the printer is
needed (font-download, overlays, etc.).
Example @Y44, 1@ selects suppression of CRs and Spaces to the same
position.
XEROX MRP FAMILY COAX COMMAND REFERENCE 3-37