Filter
Top Products
NOTICES
International configuration of ELCI/RCD
1 Window
2 Reset button.
If power to the printer is interrupted, follow these steps:
1. Locate the safety device, using the U.S. or International
Configuration (refer to the appropriate illustration).
2. Check to see if a red flag displays in the window of the
safety device.
3. If the red flag does not display, press and release the black
Reset button.
The red flag displays and power is restored to the system.
If power is not restored by this procedure or if the device
interrupts power to the machine again, call your Xerox service
representative.
XEROX MRP FAMILY COAX COMMAND REFERENCE ix