Filter
Top Products
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Only n1 = 0 or 1 is supported for envelope feeder. (Refer to
related FSL function Y11.)
If n1 is greater than 3 (n1>3), then FSL Y62—Setup for IBM-
defined Strings command is not used.
Example @Y10, 1@ selects landscape format with no scaling.
Y11—Set Default Paper Path
@Y11, <n1>, {n2}@
Selects the default input paper tray, or links an input tray to an
output paper tray.
Utility
FSL
Y11, n1
PCL parameter to
Esc&I#H
4220/MRP
4230/MRP
N/A N/A 0 Current Tray Not Supported
TRAY1 2 1 Paper Tray Tray 1
TRAY2 5 3 Manual-Envelope Tray 2
TRAY3 3 4 Lower Tray Tray 3
TRAY4 6 5 Paper Deck Tray 4
TRAY5 4 2 Manual-Paper Tray 5**
N/A N/A 6 Envelope Feeder Tray 5**
Utility
FSL
Y11, n1
PCL parameter to
Esc&I#H
4215/MRP and
4219/MRP
N/A N/A 0 Current Tray Current Tray
UPPER 2 1 Paper Tray Upper Tray
MIDDLE 1 7 Undefined Middle Tray
LOWER 3 4 Lower Tray Lower Tray
MAN-PAP 4 2 Manual-Paper Manual Tray-Paper
MAN-ENV 5 3 Manual-Envelope Manual Tray-
Envelope
N/A N/A 6 Envelope Feeder Not Supported
** Cannot be changed. Other printer trays can be remapped at
the user interface.
If the code is placed as the first printable character on the page,
the changed format is effective as soon as the printer receives
the command. If the command is placed at any other position
on the page, the change is effective on the next page.
The n1 parameter produces a PCL5 sequence that selects the
proper input paper tray. The table provides a cross reference
3-20 XEROX MRP FAMILY COAX COMMAND REFERENCE