Xerox 5230 All in One Printer User Manual


 
Copy
51
Width:50%, Length:100% - Sets the reduction/enlargement ratio of the width to 50%
and that of the length to 100%.
NOTE: The above options are displayed when the paper size series is set to [A/B
Series]. When [Inch Series] or other paper size series is selected, the options
displayed will be different. For information on how to change the paper size series,
refer to the Setup chapter in the System Administration Guide.
NOTE: When [Auto %] is selected, Tray 1 is automatically selected, even when [Auto
Paper Select] is selected in [Paper Supply].
Paper Supply
The available paper trays are displayed on the touch screen together with the media
size and orientation preset for each tray.
When changing the size or type of media in a tray, the tray must be reprogrammed by
the System Administrator to match the media being loaded. For more information on
reprogramming the tray, contact the System Administrator.
For information on the sizes and types of media supported by the machine, refer to the
Paper and Other Media chapter in the System Administration Guide.
1.
Select a preset button or [More]
for the [Paper Supply] feature on
the [Copy] screen.
More
Displays the [Paper Supply] screen. For more information, refer to
[Paper Supply]
Screen on page 51
.
[Paper Supply] Screen
Allows you to select a paper tray from the preset trays, including the bypass tray.
Presets
Allows you to select a paper tray
from the three preset trays set up by
the System Administrator. The tray
number, paper size, and orientation
are also displayed for all trays.
5 J
Displays the [Tray 5 (Bypass)] screen when a paper size and type are not preset by the
System Administrator. For more information, refer to
[Tray 5 (Bypass)] Screen on page
52
.
Auto Paper Select
Allows you to select an appropriate tray automatically according to the document size,
amount of reduction or enlargement, and related features settings.
NOTE: When [Paper Supply] is set to [Auto Paper Select], [Reduce/Enlarge] is
automatically set to [100%] and [Auto %] cannot be selected.