Xerox 5230 All in One Printer User Manual


 
3 Copy
52
[Tray 5 (Bypass)] Screen
You can temporarily use the bypass tray to load paper that is unavailable from Trays
1-4. Up to a 10 mm (0.4 inch) stack of paper (approximately 95 sheets of 80 g/m
2
paper) can be loaded in the bypass tray.
Paper Size
Auto Size Detect - Detects the
paper size automatically.
Standard Size - Displays the
preset paper sizes on the touch
screen, and allows you to select a paper size. The presets are set up by the System
Administrator.
Custom Size - Allows you to specify the width and length of the paper size using the
scroll buttons in 1 mm (0.1 inch) increments. The acceptable ranges of paper sizes
are 89-297 mm (3.5-11.7 inches) for the width and 99-432 mm (3.9-17.0 inches) for
the length.
Paper Type
Displays the preset paper types on the touch screen, and allows you to select the paper
type. The presets are set up by the System Administrator. The setting is only temporary
and applies only to the current copy job.
2 Sided Copying
This feature allows you to automatically make single or double-sided copies from single
or double-sided documents.
NOTE: Before using the feature, specify the document orientation to indicate the top
of the document in [Original Orientation] on the [Layout Adjustment] screen.
NOTE: The 2 Sided Copying option cannot be used with the following paper types:
Transparency, Lightweight, Heavyweight, Labels, Bond, as well as paper already
printed on one side.
1.
Select a preset button or [More]
for the [2 Sided Copying]
feature on the [Copy] screen.
More
Displays the [2 Sided Copying] screen. For more information, refer to
[2 Sided Copying]
Screen on page 53
.