Xerox 5230 All in One Printer User Manual


 
3 Copy
54
1.
Select a preset button or [More]
for the [Copy Output] feature on
the [Copy] screen.
NOTE: The screen shown on the
right is displayed when the Office
Finisher LX is installed. If the
Integrated Office Finisher is
installed, or if a finisher is not
installed, the display will be
different.
Collated
Delivers the specified number of copy sets in the same order as the documents. Other
collation options are available on the [Copy Output] screen. For more information, refer
to
[Copy Output] Screen on page 54
.
1 Staple
Attaches one staple to the top left corner of your output. Other stapling options are
available on the [Copy Output] tab. For more information, refer to
[Copy Output] Screen
on page 54
.
Folding
Displays the [Folding] screen where you can select a folding option for your output.
NOTE: When copying a document using this feature, wait to take the copies out of the
output tray until the copy job is completed.
No Folding - Disables the Folding function.
Single Fold - Makes a crease in each sheet of the outputs for easy folding.
Booklet Creation
Displays the [Booklet Creation] screen. This feature is identical to [Booklet Creation] on
the [Output Format] tab. For information, refer to
Booklet Creation on page 63
.
Hole Punch & More
Displays the [Copy Output] Screen. For more information, refer to
[Copy Output]
Screen on page 54
.
NOTE: [Hole Punch & More] appears when the Office Finisher LX is installed. When
the Integrated Office Finisher is installed, or when a finisher is not installed, [More] is
displayed instead.
[Copy Output] Screen
Allows you to select the staple and/or hole-punch position and sorting method for your
output, and to specify the output tray.
NOTE: The screen shown on the
right is displayed when the Office
Finisher LX is installed. If the
Integrated Office Finisher is
installed, or if a finisher is not
installed, the display will be
different.