Filter
Top Products
4
4-4 Administering the DocuColor
Frame Type selection
(Network Protocol Setup/
IPX/SPX Setup)
Can’t detect Token Ring
hardware.
Token Ring hardware
not installed or
not functioning.
DocuColor queries the Token Ring hardware. Error
indicates that some components are not installed, are not
installed correctly, or not installed in the correct device. An
unsupported Token Ring board may be in use. Check with
your authorized service/support center.
Invalid frame size.
The network hub is not connected to a Novell machine
when the DocuColor tries to bind.
Warning! IPX network
number is zero.
No other IPX machine can be found on the network, or
the network hub is not connected to the network, when
the DocuColor tries to bind. When this occurs, the
network number defaults to zero.
Token Ring Setup Can’t autodetect the ring
speed. No device on ring.
The DocuColor is trying to detect the current ring speed,
but it is the only machine on the Token Ring network.
Connect another machine to the Token Ring network first,
before connecting the DocuColor.
Frame Type selection
(Network Protocol Setup>
IPX/SPX Setup)
Invalid frame size.
The network hub is not connected to a Novell machine
when the DocuColor tries to bind.
Warning! IPX network
number is zero.
No other IPX machine can be found on the network, or
the network hub is not connected to the network, when
the DocuColor tries to bind. When this occurs, the
network number defaults to zero.
Enable NDS
(Network Service
Setup>PServer Setup>NDS
Setup)
No NDS trees found.
No NDS trees were found on the Novell network. Check
that IPX frame types are properly set.
After this Setup screen: This message: Means: