Filter
Top Products
1
1-2 Connecting to the Network
Stages of installation on the network
Installation can be performed by a network or printing administrator. The stages of a
successful installation are:
• Physically connecting the DocuColor to a functioning network
Prepare a network node for the DocuColor—obtain cable and route it to the location
where the DocuColor will be installed (near the copier), and attach the cable to the
network interface of the DocuColor. See page 1-11 for details.
• Configuring the network server
When network servers are required, you need to configure those servers to provide cli-
ent access to the DocuColor as a color PostScript printer. See Chapter 3 for configur-
ing network servers in Windows and UNIX network environments.
• DocuColor Setup
Configure the DocuColor for your particular printing and network environment. See
Chapter 2 for details.
• Client setup
Install the files needed for printing, install additional user software, and connect the
client to the DocuColor over the network. These steps are described in
Getting Started,
and some information is provided in Chapter 3 of this manual.
• System administration
Monitor and maintain system performance and troubleshoot problems that arise. See
Chapter 4 for details.