Filter
Top Products
2
2-7 About DocuColor Setup
When you have entered all the settings or made all the changes you want, you need to
save the changes. You are usually prompted to do so. If you choose Yes, your settings
overwrite previous settings. If you choose No, your previous settings are retained. If
necessary, the DocuColor reboots after you exit from the Setup menu.
Server Setup options
The Server Setup menu enables you to specify system information that pertains to the
DocuColor itself and all users. Accessing the menu is described on page 2-2.
When you choose Server Setup, the options appear in sequence, as described below.
Default values, where applicable, are shown in square brackets.
Server Name
Default server name
Use this option to give the DocuColor a name (up to 10 characters long).
Enter this name when you configure the Chooser list for utilities on IPX/SPX net-
works (see the Getting Started).
If you have multiple color servers and give them the same name, a unique number is
appended to the name that appears in the Chooser. Although this routes jobs correctly,
it may be inconvenient to users and is not a recommended practice.
System Date
Use this option to change the system date. Enter the date in the standard form for your
usage: either MM/DD/YY or DD/MM/YY. The date is used on the cover page and on Job
Logs.
System Time
HH:MM
Use this option to change the system time. Enter the time based on the 24-hour clock
in the form HH:MM (Hours:Minutes). The time is used on the cover page and on
Job Logs.
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
Press button for Server Setup