Filter
Top Products
2
2-15 Network Setup options
TCP/IP Setup with Ethernet
IP Address
[127.0.0.1]
Enter the DocuColor IP address for Ethernet. The DocuColor is shipped with an
invalid IP address. If you plan to print with TCP/IP, you must first assign the Docu-
Color a unique, valid IP address. For information about setting up printing with
TCP/IP, see Chapter 3.
Subnet Mask
[255.255.255.0]
This option lets you modify the subnet mask for printing with TCP/IP over Ethernet.
The subnet mask is set to 255.255.255.0 by default. If you set the IP address and you
need to set the subnet mask, enter one of the following values:
• 255.0.0.0—If the IP address starts with a number less than 128.
• 255.255.0.0—If the IP address starts with a number from 128 through 191.
• 255.255.255.0—If the IP address starts with a number greater than 191.
Network Setup
Protocol Setup
TCP/IP Setup
Ethernet Setup
Enable TCP/IP for Ethernet
Yes/No [Yes]
Select Yes if you have a TCP/IP network connected to the DocuColor over Ethernet
cabling.
You need to enable TCP/IP for Ethernet to use the WebTools over Ethernet. If you
are using TCP/IP for printing from Windows NT workstations, enabling
TCP/IP here also enables you to use the remote utilities from Windows NT
workstations using TCP/IP protocols.