Filter
Top Products
3
3-20 Setting up Network Servers
• If the Windows NT 4.0 server is also a workstation, install the remote utilities (see
Getting Started and page 3-26).
Loading the TCP/IP network protocol
If the TCP/IP protocol has not yet been installed on the Windows NT server, use the
procedure in this section.
For this installation, you will need:
• Your Windows NT installation disks
• The IP address of the Windows NT server
• The IP address of the DocuColor (see page 3-29)
• The internal name of the remote printer (see page 3-30)
TO ADD TCP/IP NETWORK SERVICES:
1. Log in to the Windows NT server as Administrator.
2. In the Control Panel, double-click the Network icon.
The Network Settings dialog box appears.
3. Click Add Software.
4. In the Add Network Software dialog box, select TCP/IP Protocols and Related Compo-
nents, and click Continue.
5. In the Installation dialog box, be sure to check TCP/IP Network Printing Support.
This supplies the necessary lpd protocol. If the item is grayed, it is already installed on
your system.
6. Configure the Windows NT server with its own IP address, subnet mask, and default
gateway.
For Windows NT configuration options you can use with various host name systems,
see your online or printed Windows NT documentation.
7. When you are finished configuring TCP/IP choose Close and restart your computer for
the changes to take effect.
8. Add the DocuColor to the network (see the next section).