Filter
Top Products
4
4-6 Administering the DocuColor
Enter First Letters
of Server Name
(Network Service Setup/
PServer Setup/Bindery Setup)
File server name not found.
Try again?
No file server with those letters was found when
DocuColor queried the network. Check the name of the
NetWare file server, check cable connections, and make
sure the NetWare server is turned on.
View Server List,
Edit Connection
(Network Service Setup/
PServer Setup/Bindery Setup)
No file server is selected.
No file server has been added in Bindery Setup.
Add File Server
(Network Service Setup/
PServer Setup/Bindery Setup)
All connections used.
Remove server?
You have added the maximum number of bindery servers,
which is eight.
Add Server, Enter Your Login
Name, Enter Your File Server
Password
(Network Service Setup/
PServer Setup/Bindery Setup)
No NetWare print
server found.
No print server was found when DocuColor queried the
file server you selected.
You must configure a print server and a print queue for
every NetWare file server that will handle DocuColor print
jobs (see page 3-4).
Any Bindery Setup screen
Novell error code, followed by
a message.
Novell NetWare has reported an error. The Control Panel
reports the error number and displays a brief explanatory
message.
For the most common errors (listed in the following table),
a screen is displayed that enables you to retry the action
that evoked the error, such as adding a server. If that is not
possible, you are prompted to notify the Novell
administrator, who will need to troubleshoot the network.
Consult NetWare Administrator documentation for
further explanation of Novell error codes.
After this Setup screen: This message: Means: