Filter
Top Products
4
4-5 Troubleshooting the DocuColor
Select NDS Tree
(Network Service Setup/
PServer Setup/NDS Setup)
Warning! Selecting a new NDS
tree deletes Bindery setup.
You have previously connected the DocuColor to a
different NDS tree. NEST supports only a single NDS tree
connection. To avoid a potential conflict with an existing
tree connection (for example, if the connection was made
through a NetWare 4.x server in emulation mode), all
bindery settings will be deleted.
If you choose OK, and choose Yes in the following message
screen (
Delete Bindery setup and continue?), bindery
settings are deleted and have to be re-entered in Bindery
Setup.
To avoid deleting the bindery settings press the Menu key,
or select OK and choose No in the following message
screen (
Delete Bindery setup and continue?).
Repeat NDS Setup without changing the NDS tree, or exit
to Bindery Setup to review your current bindery settings.
Navigating NDS tree
(Network Service Setup/
PServer Setup/NDS Setup)
___ is empty.
The chosen container contains no sub-containers or
objects relevant to the current mode of navigation.
Enter Password,
Enter Print Server Password
(Network Service Setup/
PServer Setup/NDS Setup)
Login to NDS tree (or Print
Server) failed.
Please try again.
The password you entered failed. Press the Menu button,
check the password, return to the password entry screen
and re-enter the password.
Bindery Setup
(Network Service Setup/
PServer Setup/Bindery Setup)
If you also plan to use NDS,
set up NDS before Bindery.
No NDS settings are present. You are reminded to perform
NDS Setup before Bindery Setup in case your network
includes both NDS and bindery servers.
Select File Server From List
(Network Service Setup/
PServer Setup/Bindery Setup)
Error. Cannot open bindery
connection to NDS server.
Select this server through NDS setup or disable NDS and
select it through bindery.
Select File Server From List
(Network Service Setup/
PServer Setup/Bindery Setup)
No NetWare file
server found.
No file server was found when DocuColor queried the
network to create a list of supported servers or a list of all
servers.
Check cable connections and make sure the NetWare
server is turned on.
After this Setup screen: This message: Means: