Filter
Top Products
2-Sided Printing
Phaser® 6250 Color Laser Printer
2-28
To perform automatic 2-sided printing:
1. Insert paper into the tray. For more information see the “Basic Printing” topic in this
section. Place the side to be printed with the odd-numbered pages face down with the top
of the page at the back of the tray. If using paper with pre-punched holes, place the holes
toward the right side of the tray when you are facing the front panel.
Caution
If you change the type of paper in a tray, you must change the paper type on the front
panel to match the paper that you loaded. If you fail to do this, print-quality
problems can occur and the fuser can be damaged.
2. In the printer driver:
■ Select the appropriate tray.
■ Select the orientation.
■ Select 2-sided printing as described in the table below.
3. Click OK to accept the printer driver settings, then click OK to print.
Setting the Printer Driver for 2-Sided Printing
Operating System Steps
Windows 98 or
Windows Me
1. Select File, then select Print.
2. Click Properties.
3. Select Setup, then select Print 2 Sides.
4. Select or deselect Bind On Top Edge.
Windows 2000,
Windows XP, or
Windows Server 2003
1. Select File, then select Print.
2. Click Properties.
3. Select either Flip On Long Edge, or Flip On Short Edge in Print On
Both Sides (Duplex) on the Layout tab.
Windows NT 1. Select File, then select Print.
2. Click Properties.
3. Select either Long Edge, or Short Edge in Print On Both Sides
(duplex printing) on the Page Setup tab.
6250-058
PH