Filter
Top Products
Xerox 700 Digital Color Press User Guide 3-9
Paper
The bypass tray can hold up to 250 sheets of 20lb
bond, from 4.0"x6.0" to 13"x19" paper in a variety
of different media stock.
This procedure shows you how to load media into
the bypass tray.
If enabled by your System Administrator, the
Paper Tray settings screen may be displayed on
the touch screen.
Fan the sheets before loading them into the tray.
Register the stack of paper or media against the
right side of the tray. The paper or media must
not be loaded above the maximum fill line.
Move the front and rear guides to just touch the
edges of the stack.
Locate the sheet(s) against the right of the tray
and move the front and rear guides to touch the
edges of the sheet(s).
The Bypass Tray detects the position of the side
guide to determine the size of the stock.
When stock is loaded into the Bypass Tray, a
pop-up window may appear asking you to change
or confirm the type and size of the stock. The tray
will not be ready for use until you change or
confirm the size and type of stock.
Alternatively, you can change the paper size and
paper type by accessing the Paper Tray
Attributes screen from the System Administrator
Menu.
Loading the bypass tray