Page 28 Xerox WorkCentre Pro/CopyCentre User Guide
Making Copies
1. Load your Originals
l If using the Document Feeder...
Place the originals into the Document Feeder face up, with
page one on top. The originals should be in good
condition, and without staples or paper clips.
Adjust the edge guides against the original. Otherwise, the
copies may print incorrectly or the originals may jam.
For fastest performance, place the originals Long Edge
Feed with the top of the document away from you.
l If using the Document Glass...
Use the Document Glass to copy bound, stapled, folded or
wrinkled originals, odd or oversize documents, books, or
glossy photographs.
Raise the Document Glass Cover.
Place the original face down into the top left corner of the
glass. Ensure that the top left corner of the original fits into
the corner of the registration edge.
When using the copy features; Auto Paper, Auto%, Auto
Centre, or Bound Originals, the cover must be raised.
Press Clear All
If necessary, press the Clear All ( )button to reset the
selections that were made for the previous job.
Document Feeder
Edge Guides
Document Glass