Xerox WorkCentre Pro/CopyCentre User Guide Page 55
Try These Jobs
Placing Multiple Images on a Single Page
Typical Application
Any situation where you want to present multiple reduced
images (thumbnail images) to a reader.
Procedure
1. Load your Originals.
2. Depending on the configuration of your machine press
either the More Copy Features tab or the Output Format
tab. If the More Copy Features tab is selected press
Output Format tab.
3. Press the Multi-Up button then press On.
4. Select the correct orientation of your originals based on the
information displayed on the screen.
5. Select the number of rows and columns. Press the Save
button.
6. Ensure the originals are loaded into the Document Feeder
as illustrated on the Multi-Up screen.
7. Make your programming selections by touching the
screen. The most common selections are on the Basic
Copying tab (Output, 2-sided Copy, Reduction/
Enlargement, and Paper Supply).
8. Use the keypad to enter the number of copy sets.
9. Press the Start ( ) button.
HINT
Sixteen A4 images can be displayed on A4 paper (4 rows x 4
columns).