Page 34 Xerox WorkCentre Pro/CopyCentre User Guide
Faxing Documents (Optional Feature)
1. Load your Originals
l If using the Document Feeder...
Place either 1 or 2 sided originals into the Document
Feeder face up, with page one on top. The originals should
be in good condition, and without staples or paper clips.
Adjust the edge guides against the original. Otherwise, the
copies may print incorrectly or the originals may jam.
For fastest performance, place the originals Long Edge
Feed with the top of the document away from you.
l If using the Document Glass...
Raise the Document Glass Cover.
Place the original face down into the top left corner of the
glass. Ensure that the top left corner of the original fits into
the corner of the registration edge.
Press Clear All
If necessary, press the Clear All ( )button to reset the
selections that were made for the previous job.
NOTE
The system has an Image Rotation feature that enables you
to feed originals Long Edge Feed (LEF) even if the
destination Fax can only print Short Edge Feed (SEF).
Document Feeder
Edge Guides
Document Glass