Filter
Top Products
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 6-23
Fax
Auto Reduction On Use to activate the machine performing an
automatic reduction for over-sized fax jobs.
Off Use to de-activate the automatic reduction.
Over-sized jobs are printed on two pages.
Prefix Dial Up to 5 digits The number entered will be added to the
beginning of each fax sent.
Auto Report On Use to enable a report listing details about the
previous 50 communication operations.
Off
ECM Mode On Use to switch on ECM for all transmissions.
Transmission time may be increased when
ECM is enabled.
Off Use to switch off ECM.
Redials [0 - 13] Use to set the number of redial attempts.
Ring to Answer [1 - 7] Use to set the number of rings before
answering.
Redial Term [1 - 15] Use to set the number of minutes between
redial attempts.
Ringer Off Use to set the ringer volume.
Low
Med
High
Junk Fax Setup On Use to restrict receipt of junk mail by only
allowing faxes to be received from remote
machines registered on your machine.
Off
Secure Receive On Use to set the default option for receiving
secure faxes.
Off
Print
Fax Auto Tray Tray 1 Selects the default paper tray for fax jobs.
Tray 1 & Tray 2
All