Filter
Top Products
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 9-31
Machine Administration
Enabling or Disabling Auxiliary Access
Auxiliary Access allows a foreign interface board to be recognized. Use these instructions to
enable or disable Auxiliary Access:
1
! Press the [Machine Status] key.
Enter Machine
Status
2
! Using the Navigation Keys select
[System Admin Tools] and press
[Enter].
! If the System Admin Tools have
already been passcode
protected, type in the password
and press [Enter].
System Admin Tools
[Passcode Protect]
3
! Select [Auxiliary Access] and
press [Enter].
! To enable Auxiliary Access,
select [On] is displayed and press
[Enter]. Otherwise, select [Off]
and press [Enter].
System Admin Tools
[Auxiliary Access]