Filter
Top Products
Page 2-24 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Getting Started
Driver Installation
Before direct printing, direct scanning or using ControlCentre through the Parallel Port or the
USB port, you will need to install a driver.
The procedure will install the driver and configure it for the local port.
To install the driver on the workstation.
! Insert the Driver CD into the CD drive.
Within a few seconds, the CD should start automatically and present you with the opening
screen. If this does not happen, go to the Start menu, select [Run] and browse to the CD
drive. Select [Setup] and click [OK]. Click [OK] to start the installation procedure.
! Select the language for the installation and select [Continue].
The driver screen is displayed.
! Check the boxes for the drivers required, PostScript, PCL, PC Scan and ControlCentre.
! Select [Continue].
#
You can choose to install as many drivers as you require by checking the appropriate boxes.
1
2
3