Filter
Top Products
Page 9-28 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Machine Administration
New Drum
This function is used to reset the drum counter after the drum has been replaced.
1
! Press the [Machine Status] key.
2
! Using the Navigation Keys select
[System Admin Tools] and press
[Enter].
! If the System Admin Tools have
already been passcode
protected, type in the password
and press [Enter].
System Admin Tools
[Passcode Protect]
3
! Select [New Drum] and press
[Enter].
! To set the drum counter to zero,
select [On] and press [Enter].
Otherwise, select [Off] and press
[Enter] to exit the selection.
New Drum
[On]