Filter
Top Products
Print-Quality Problems
Phaser® 6280 Printer
108
Stray black dots or white
areas (drop outs)
The paper is outside the recommended specification range.
Replace the paper with a recommended size and type, and confirm that your
control panel settings are correct. See About Paper on page 48.
The transfer unit is old or damaged.
Replace the transfer unit.
The print cartridges are not Xerox print cartridges.
• Check the condition of the print cartridge, and replace as necessary.
• Verify that the print cartridges (C/M/Y/K) meet specifications, and
replace if necessary.
Vertical black or color
streaks
Multiple colored streaks or lines:
• The transfer unit, or fuser, is old or damaged.
Check the condition of the transfer unit and fuser, and replace as
necessary.
• The print cartridges are not Xerox print cartridges.
Verify that the print cartridges (C/M/Y/K) meet specifications, and replace if
necessary.
Streak in only one color:
• Check the condition of the print cartridge, and replace as necessary.
Verify that the print cartridge meets specifications, and replace if necessary.
Recurring smudges Dirt in the paper path.
Print several blank sheets.
The paper is outside the recommended specification range.
Replace the paper with a recommended size and type, and confirm that your
control panel settings are correct. See About Paper on page 48.
The transfer unit, or fuser, is old or damaged.
Check the condition of the transfer unit and fuser, and replace as necessary.
Symptom Reason/Action