Filter
Top Products
Printing Custom Size or Long Paper
Phaser® 6280 Printer
83
5. Specify the length of the short edge and long edge under
Settings For. You can specify
the values either by entering them directly or using the
Up Arrow and Down Arrow
buttons. The length of the short edge cannot be longer than the long edge, even if it is
within the specified range. The length of the long edge cannot be shorter than the
short edge, even if it is within the specified range.
6. To assign a paper name, select the
Name Paper Size check box, and then enter the
name in
Paper Name. Up to 14 characters can be used for the paper name.
7. If necessary, repeat steps 4 to 6 to define another custom size.
8. Click
OK twice.
Using the PostScript Driver
On the PostScript print driver, set the custom size in the Custom Paper Size dialog box. This
section explains the procedure using Windows XP as an example.
1. To start, do the following:
• Windows 2000-XP: Click Start > Settings > Printers and Faxes.
• Windows Vista: Click Start > Printers.
Right-click the printer and select Properties.
2. Select the
General tab.
3. Click the
Printing Preferences button.
4. From
Paper Size, select Custom Paper Size.
5. Specify the length of the short edge and long edge under
Custom Size Settings. You
can specify the values either by entering them directly. The length of the short edge
cannot be longer than the long edge, even if it is within the specified range. The length
of the long edge cannot be shorter than the short edge, even if it is within the specified
range.
6. Click
OK three times.
Printing on Custom Size Paper
Use the following procedures to print using either the PCL or PostScript drivers.
Using the PCL Driver
The procedure to print on custom size paper using the PCL print driver is as follows.
1. From the
File menu, select Print.
2. Select this printer as the printer to be used and click
Preferences or Properties.
3. Select the
Paper/Output tab.
4. Select the appropriate paper tray from
Paper Tray.
5. Select the appropriate paper type from
Paper Type.
6. From
Paper Size, select the size of the original document.
7. Click the
Layout tab.
8. The
Fit to New Paper Size menu defaults to Same As Paper Size.
9. Click
OK.
10. Click
Print in the Print dialog box to start printing.