Filter
Top Products
Color Registration
Phaser® 6280 Printer
111
Color Registration
Color registration can be adjusted by the printer automatically, or you can manually adjust
it. Color registration should be adjusted any time the printer is moved.
For more information, see Checking Page Counts on page 149.
Automatic Color Registration Adjustment
Use the following procedure to perform automatic color registration adjustment.
Note: An automatic color registration adjustment is performed every time a new print
cartridge is installed.
1. Press the Menu button to display the
Menu screen.
2. Press the Up Arrow or Down Arrow button until
Admin Menu is displayed, and then
press the Forward Arrow or OK button.
3. Press the Up Arrow or Down Arrow button until
Maintenance Mode is displayed, and
then press the Forward Arrow or OK button.
4. Press the Up Arrow or Down Arrow button until
Adjust ColorRegi is displayed, and then
press the Forward Arrow or OK button.
5. Press the Up Arrow or Down Arrow button until
Auto Adjust is displayed, and then
press the Forward Arrow or OK button.
6. Press the OK button when
Are you sure? is displayed.
The adjustment is complete when
Ready is displayed on the control panel.
Manual Color Registration Adjustment
You can fine tune color registration by performing a manual adjustment of color
registration.
Printing the Color Registration Correction Chart
1. Press the Menu button to display the Menu screen.
2. Press the Up Arrow or Down Arrow button until
Admin Menu is displayed, and then
press the Forward Arrow or OK button.
3. Press the Up Arrow or Down Arrow button until
Maintenance Mode is displayed, and
then press the Forward Arrow or OK button.
4. Press the Up Arrow or Down Arrow button until
Adjust ColorRegi is displayed, and then
press the Forward Arrow or OK button.
5. Press the Up Arrow or Down Arrow button until
Color Regi Chart is displayed, then
press the OK button. The Color Registration Correction Chart is printed. When printing
is finished, the print screen is displayed again.