Filter
Top Products
User Safety
Phaser® 6280 Printer
11
• Place the printer on a level, solid non-vibrating surface with adequate strength for the
weight of the printer. It should be within 1° of horizontal with all four feet in solid
contact with the surface. The printer weight with the duplex unit and consumables is
29.25 kg (64.5 lb.).
• Do not place the printer in locations exposed to magnetic forces.
• Do not place the printer in damp locations.
• Do not place the printer in locations susceptible to vibrations.
Printing Safety Guidelines
• Wait 10-15 seconds between turning the printer off and on.
• Keep hands, hair, neckties, etc., away from the exit and feed rollers.
When the printer is printing:
• Do not remove the paper source tray that you selected in either the printer driver or
control panel.
• Do not open the doors.
• Do not move the printer.
Printer Supplies
• Use the supplies specifically designed for your printer. The use of unsuitable materials
may cause poor performance and a possible safety hazard.
• Follow all warnings and instructions marked on, or supplied with, the printer, options,
and supplies.
Caution: Use of non-Xerox supplies is not recommended. The Xerox Warranty, Service
Agreements, and Total Satisfaction Guarantee do not cover damage, malfunction, or
degradation of performance caused by use of non-Xerox supplies, or the use of Xerox
supplies not specified for this printer. The Total Satisfaction Guarantee is available in the
United States and Canada. Coverage may vary outside these areas; please contact your
local representative for details.