Filter
Top Products
Control Panel Error Messages
Phaser® 6280 Printer
137
Out of Memory
Press OK Button
Error 016-718
The printer memory is full and cannot continue processing the current
print job.
Press the OK button to clear the message, cancel the current print job,
and conduct the next print job, if any.
Press the Cancel button to cancel the print job.
Press the Left Arrow button to open the Walk-Up Features menu and
delete the job being held.
if the problem has not been corrected, turn the printer off and then on
again.
To avoid this error in the future, do the following:
• Delete unnecessary fonts, macros, and other data in printer
memory.
• Install additional printer memory.
PDL Error
Press OK Button
Error 016-720
Error relating to PCL emulation problems has occurred.
Press the OK button to clear the message, cancel the current print job,
and conduct the next print job, if any.
Press the Cancel button to cancel the print job.
Disk Full
Press OK Button
Error 016-982
RAM disk memory is full and cannot continue processing the current
print job.
Press the OK button to clear the message, cancel the current print job,
and conduct the next print job, if any.
Press the Cancel button to cancel the print job.
Press the Left Arrow button to open the Walk-Up Features menu and
delete the current job.
To avoid this error in the future, do the following:
Reduce the number of print pages, such as splitting the print data.
Increase free memory space by deleting unnecessary data in the
RAM disk.
Ready to Print %S
Over Heat
Turned Halfmode
The printer’s internal temperature is too high.
Processing on the printer has been slowed down. When the internal
temperature falls, the processing speed will automatically increase.
Ready to Print %S
Non-Xerox Toner
The printer is in the custom toner mode.
Though some of the print cartridges reach the end of their lives, you
can continue printing.
Restart Printer
116-NNN
*3
Error NNN-NNN relates to printer problems.
Turn the printer off and then on.
If the error continues, refer to the Xerox Support website,
www.xerox.com/office/6280support
.
550 Feeder Error
Restart Printer /
Error 072-215
Restart Printer
The 550-Sheet Feeder (optional) is not installed correctly or is not
working correctly due to damage or malfunction.
Reinstall the sheet feeder.
Message Condition/Reason/Action