Filter
Top Products
Setting Paper Types and Sizes
Phaser® 6280 Printer
50
Setting Paper Types and Sizes
Setting Paper Trays
When loading paper in Tray 3 or the 550-Sheet Feeder (optional), it is necessary to set the
paper type on the control panel.
When loading paper in Tray 1 (MPT), set the paper size and type on the control panel when
printing. When
MPT Mode has been set to Panel Specified (default) on the control panel,
you can set the paper size and type on the control panel.
This section describes how to set the paper size and type on the control panel.
Note: When you set
MPT Mode to Panel Specified, printing will be performed only when
the settings for the paper size and type configured on the print driver match the settings
on the control panel. When the settings on the print driver and control panel do not match,
follow the instructions displayed on the control panel.
You can also display the message to set the paper size and type on the control panel every
time you load paper into each tray.
See also:
Description of Menu Items on page 93
Setting Paper Types
Caution: Paper type settings must match those of the actual paper loaded in the trays.
Otherwise, print-quality problems can occur.
1. Press the
Menu button to display the Menu screen.
2. Select
Tray Settings, and then press the OK button.
3. Select the tray, and then press the
OK button.
4. Select
Paper Type, and then press the OK button.
5. Select the correct paper type for the loaded paper, and then press the
OK button.
6. Press the
Menu button.