Filter
Top Products
Control Panel Messages
Chapter 6: Troubleshooting
❖
6-17
Pause
The printing process has been suspended by setting the printer off-line. The On Line
light goes off.
ACTION: None.
PCL 5e
The printer is set to PCL 5e emulation. The On Line light remains on.
ACTION: None.
PO
A paper tray is out of paper.
Media status is indicated in the display as UPPER/LOWER, indicating status of
upper tray and lower tray. For example: PO/A4 indicates that the upper tray is
out of paper and the lower tray is loaded with A4 paper.
The On Line light remains on.
ACTION: Re-load the applicable paper tray.
PS2
The printer is set to PostScript Level 2 emulation. The On Line light remains on.
ACTION: None.
Repl Drum
The Photoconductor / Drum has worn out. The Supply and Error lights remain on.
ACTION: Replace the Photoconductor / Drum.
Repl Toner
Toner has run out. The Supply and Error lights remain on.
ACTION: Replace the Toner Cartridge.
Repl Drum&Toner
The Photoconductor / Drum has reached its rated life and toner has run out. The Supply
and Error lights remain on.
ACTION: Replace the Photoconductor / Drum and Toner Cartridge.
Self Test
The printer is testing itself at power on. The On Line light goes on at the completion of
testing.
ACTION: None.
Toner Low
Toner in reservoir is getting low. The Supply light remains on.
ACTION: Order a new Toner Cartridge.
Table 6.3 Control Panel messages
(continued)
Message
Description/Corrective Action
Table 6.3 Page 3 of 3