Filter
Top Products
Introduction
1-4
❖
DocuPrint 4512/4512N User Guide
Special Features
Several features have been designed into the DocuPrint 4512 to enhance
your printing environment. Using the Control Panel menu system, you
can tailor printer settings to match your printing requirements.
See
Chapter 3: The Control Panel
for more information about the
Control Panel and its menu system.
Duplex Printing
The DocuPrint 4512 can print two-sided documents. Duplex printing is
as easy as printing a one-sided job.
Multiple
Paper Trays and
Increased Paper
Handling
The DocuPrint 4512 offers two paper trays, each of which can hold up
to 250 sheets of paper. When the paper source is set to AUTO SELECT
(the factory default), the printer automatically senses the paper size and
feeds paper from the appropriate tray according to print instructions
from the application software. If both trays contain the same size of
paper, the printer gives priority to the lower tray and feeds from there
first, effectively giving you a 500-sheet capacity.
You can also install the optional 1000-sheet High Capacity Feeder to
further extend your printing capacity.
For more information on using the paper trays, see the section
“Paper
Tray Loading”
(page 2-5) in
Chapter 2: Paper Handling
.
Automatic
Emulation/Input
Switching
When you have installed the PostScript option, the printer can process
both PCL and PostScript jobs. When Emulation is set to
Auto
, the
DocuPrint 4512 samples the incoming data stream to determine which
language the print job requires. The DocuPrint 4512 then switches to the
proper language for that job.
The DocuPrint 4512 can have up to two active ports when you install an
optional interface card (AppleTalk/Serial Interface, Ethernet or Token
Ring). The printer automatically switches between input sources,
samples the print job, and switches to the appropriate processing
language.
State Saving
When you have installed the PostScript option and are printing both
PostScript and PCL jobs, the printer clears any data in memory when it
switches between PostScript and PCL 5e emulations. However, you can