Filter
Top Products
Printer Operation Problems
6-6
❖
DocuPrint 4512/4512N User Guide
Printing Errors
Printer ejects blank page. Print data. Check the print data sent from the computer. If
there are natural page breaks and forced breaks
close to each other in a word processor file, the
application may send a blank page to the
printer.
Check the printing parameters in the
application to see if they are set to send extra
page eject commands.
Some network software inserts blank pages to
separate jobs.
Tape strip on Toner Cartridge. Remove the tape strip from a newly installed
Toner Cartridge.
Toner Cartridge empty. Replace the Toner Cartridge.
If you are printing a long run of pages
with more than 30% toner coverage,
the printer may not give the usual toner
status messages. Normally the printer
will give advice messages on the
display panel when toner runs out or is
low.
Paper size mismatch. Check that the page size setting in your
application matches the paper size(s) available
in the printer.
Multiple sheets fed. Remove the paper from the paper tray, fan the
edges, straighten it up, and then put it back into
the tray.
PostScript Printing Errors
A page listing PostScript
commands is output instead of
your print job.
PCL 5e selected. Set the emulation parameter to PS2 or Auto
and try printing the job again.
A PostScript job fails to print. Insufficient memory. Either simplify the print job or install more
memory.
Table 6.1 Printer operation problems
(continued)
Problem Probable Cause Remedy
Table 6.1 Page 4 of 5