Xilinx ML310 Computer Hardware User Manual


 
64 www.xilinx.com ML310 User Guide
1-800-255-7778 UG068 (v1.01) August 25, 2004
Chapter 2: ML310 Embedded Development Platform
R
1 single-ended clock at 2.5V
1 pin not connected
Adapter Board PM Connectors
Tyco Z-Dok+ adapter board connectors, part number 1367555-1 are the receptacle
connectors on the personality modules that mate to the ML310 Tyco Z-Dok+ host board
connectors, part number 1367550-5. The Tyco data sheet for part number 1367555-1 is
available at http://www.z-dok.com/documents/1367555.pdf
.
On the adapter board connectors, located on the personality module, each signal pair has
a pair of ground pins on the opposite side of the open space, as shown in Figure 2-22. The
signal pairs alternate from side to side along the length of the open space. All of the "B" and
"E" pins are two contacts tied together and grounded on the personality module. The "A",
"C", "D", and "F" pins are signal pins.
ML310 PM Utility Pins
Contact Order
The Z-Dok+ power and ground pins contact in the following order:
1 and 6;
then 2 and 5;
then 3 and 4
Figure 2-22: Adapter Board Connector Pin Detail
B1
C2
C1
B3
C4
C3
A2
A1
B2
A4
A3
B4
E1
F2
F1
E3
F4
F3
D2
D1
E2
D4
D3
E4
Plastic Housing
Copper Pins