Filter
Top Products
Page 8
• Enter the name of the firmware upgrade file located on your PC, or click the "Browse" button
to locate the file.
• Enter the LAN IP address of the MULTI-WAN GATEWAY in the "Server IP" field.
• Click "Upgrade Firmware" to send the file to the MULTI-WAN GATEWAY.
3. When the upgrade is finished, the MULTI-WAN GATEWAY should work normally. The factory
default settings will be applied.
Note:
The supplied Windows TFTP utility also allows you to perform three (3) additional operations:
• Save the current configuration settings to your PC (use the "Save Configuration" button).
• Restore a previously saved configuration file to the MULTI-WAN GATEWAY (use the "Upgrade
Firmware" button).
• Set the MULTI-WAN GATEWAY to its default values (use the "Set to Default" button).