Filter
Top Products
Page 28
4: Advanced Setup
Overview
The following features are provided in Advanced Setup:
• Host IP
• Routing
• Virtual Server
• Special Application
• Dynamic DNS
• Multi DMZ
• UPnP Setup
• NAT Setup
• Advanced Feature
This chapter contains details on the configuration and use of each of these features.
Host IP
This feature is used in the following situations:
• You have Multi-Session PPPoE and wish to bind each session to a particular PC on your LAN.
• You wish to use the Access Filter feature. This requires that each PC is identified by using the
Host IP screen.
• You wish to have different Block URL settings for different PCs. This requires that each PC is
identified by using the Host IP screen. (You do not have to use the Host IP feature to apply the
same Block URL settings to all PCs.)
• You wish to reserve a particular (LAN) IP address for a particular PC on your LAN. This allows the
PC to use DHCP (In Windows this setting is configured as: "Obtain an IP address automatically")
while gaining the benefits of a fixed IP address. The PC's IP address will never change, allowing it
to be provided to other users and applications.