Filter
Top Products
Page 66
Data – System Status
WAN Interface
• Connection Type – The type of connection used – DHCP, Fixed IP, PPPoE
or PPTP.
• Connection Status – Either "Connected" or "Disconnected”.
• "Force Renew" button– Only available if using a dynamic IP address
(DHCP). Clicking this button will perform a DHCP "Renew" transaction with
the ISP's DHCP server. This will extend the period for which the current
WAN IP address is allocated to you.
• Connect/Disconnect – Used for dial-up/connection of PPPoE or PPTP.
• IP Address – The IP address of the MULTI-WAN GATEWAY, as seen from
the Internet. This IP Address is allocated by the ISP (Internet Service
Provider).
• Subnet Mask – The Network Mask (Subnet Mask) for the IP Address above.
• Domain Name IP Address – The address of the current DNS (Domain
Name Server)
• Gateway – The address of the MULTI-WAN GATEWAY gateway.
• MAC Address – The MAC (physical) address of the MULTI-WAN
GATEWAY, as seen from the Internet.
LAN Interface
• IP Address – The LAN IP Address of the MULTI-WAN GATEWAY.
• Subnet Mask – The Network Mask (Subnet Mask) for the IP Address above.
• MAC Address – The MAC (physical) address of the MULTI-WAN
GATEWAY, as seen from the local LAN.
• DHCP Server – The status of the DHCP Server function - either "Enabled"
or "Disabled".
Device
Information
• Hardware ID – The manufacturers ID for this particular device.
• Firmware Version – Version of the Firmware currently installed.
• NAT – Status of the NAT feature – either “Enable” or “Disable”.
• Load Balance – Status of the Load Balance feature – either “Enable” or
“Disable”.
• Virtual Server – Status of the Virtual Server feature – either "Enabled" or
"Disabled".
• Special Applications – Status of the Special Applications feature – either
"Enabled" or "Disabled".
• Multi DMZ – Status of the Multi DMZ feature – either "Enabled" or
"Disabled".
• Block URL – Status of the Block URL feature – either “Enable” or “Disable”.