Filter
Top Products
Page 20
Fixed IP Address
By default, most Unix installations use a fixed IP Address. If you wish to continue using a fixed IP
Address, make the following changes to your configuration.
• Set your Default Gateway to the IP Address of the MULTI-WAN GATEWAY.
• Ensure your DNS (Name server) settings are correct.
To act as a DHCP Client (recommended)
The procedure below may vary depending on your version of Linux and X -windows shell.
1. Start your X Windows client.
2. Select Control Panel - Network
3. Select the "Interface" entry for your Network card. Normally this will be called "eth0".
4. Click the Edit button, set the "protocol" to "DHCP" and save this data.
5. To apply your changes, use the "Deactivate" and "Activate" buttons if available. Otherwise, restart
your system.