Filter
Top Products
Page 40
Settings – Dynamic DNS
Dynamic DNS
Service
This pull-down menu can Enable/Disable the Dynamic DNS feature and select
the required service provider.
• Disable – Dynamic DNS is not used.
• TZO – Select this to use the TZO service (www.tzo.com). You must
configure the TZO section of this screen.
• DynDNS – Select this to use the standard service (from www.dyndns.org
or other provider). You must configure the Standard Client section of this
screen.
• 3322(in China) – This is available in China. It is similar to “DynDNS”
• User Defined DDNS Server – This is the user defined DDNS server. If the
DDNS provider is other than TZO, dyndns.org or 3322.
Additional
Settings
These options are available if using the standard client.
• Enable Wildcard – If selected, traffic sent to sub-domains (of your Domain
name) will also be forwarded to you.
• Enable backup MX – If enabled, you must enter the Mail Exchanger
address below.
• Mail Exchanger – If the setting above is enabled, enter the address of the
backup Mail Exchanger.
WAN Port
Binding
• Select the WAN port used by the Dynamic DNS.
• The "Force Update" button will update your record on the Dynamic DNS
Server immediately.