Filter
Top Products
Zebra S400 & S600 User’s Guide 9
7HDU2II0RGH
1. Refer to Figure 7. Move the head open lever (a) counterclockwise to
the open position to raise the printhead (b).
2. Slide the media guide (c) and the media supply guide (d) as far out
from the printer frame as possible.
If you are loading roll media in Tear-Off mode, follow steps 3-5. For
loading fanfold media in Tear-Off mode, skip to step 6.
3. Place the media roll on the media supply hanger (e), and thread the
media through the printhead assembly as shown.
Figure 7. Loading — Tear-Off Mode