Filter
Top Products
58 Zebra S400 & S600 User’s Guide
3$86(.H\6HOI7HVW
This self test can be used to provide the test labels required when making
adjustments to the printer’s mechanical assemblies. See Figure 28.
1. Press the PAUSE button while turning on the printer.
2. Release the button when the front panel LEDs turn on.
3. To return to printing mode, turn off and then turn on the printer.
NOTE: This self test consists of four individual test features:
• The initial self test prints 15 labels at 2.4"/second then
automatically pauses the printer. Each time the PAUSE button is
pressed, an additional 15 labels will print, up to 9999 labels.
• While the printer is paused, pressing the CANCEL button once
alters the self test. Now each time the PAUSE button is pressed,
the printer prints 15 labels at maximum speed, up to 9999 labels.
• While the printer is paused, pressing the CANCEL button a
second time alters the self test again. Now each time the PAUSE
button is pressed, the printer prints 50 labels at 2.4"/second, up
to 9999 labels.
• While the printer is paused, pressing the CANCEL button alters
the self test a third time. Now each time the PAUSE button is
pressed, the printer prints 50 labels at maximum speed, up to
9999 labels.
Figure 28. PAUSE Test Label