Filter
Top Products
Routine Maintenance
Cleaning Schedule and Procedures
120
P1048261-004 8/22/12
Clean the Cutter Module
If the cutter is not cutting the labels cleanly or if it jams with labels, clean the cutter.
To clean the cutter module, complete these steps:
1. Raise the media door.
2. Turn the printer off (O), and unplug the printer from its power source.
3. Remove media that is loaded through the cutter module.
4. Loosen and remove the thumbscrew and lock washer on the cutter shield.
Caution • For personnel safety, always power off and unplug the printer before performing
this procedure.