Filter
Top Products
Chapter 18 Authentication Policy
ZyWALL 110/310/1100 Series User’s Guide
259
18.3.2 Set Up User Groups
Set up the user groups and assign the users to the user groups.
1 Click Configuration > Object > User/Group > Group. Click the Add icon.
2 Enter the name of the group. In this example, it is “Finance”. Then, select User/Leo and click the
right arrow to move him to the Member list. This example only has one member in this group, so
click OK. Of course you could add more members later.
Figure 154 Configuration > Object > User/Group > Group > Add
3 Repeat this process to set up the remaining user groups.
18.3.3 Set Up User Authentication Using the RADIUS Server
This step sets up user authentication using the RADIUS server. First, configure the settings for the
RADIUS server. Then, set up the authentication method, and configure the ZyWALL to use the
authentication method. Finally, force users to log into the ZyWALL before it routes traffic for them.
1 Click Configuration > Object > AAA Server > RADIUS. Double-click the radius entry.
Configure the RADIUS server’s address, authentication port (1812 if you were not told otherwise),
and key. Select case-sensitive if the RADIUS server checks user name casing. Click Apply.