Filter
Top Products
Chapter 30 Schedules
ZyWALL 110/310/1100 Series User’s Guide
398
30.2.1 The One-Time Schedule Add/Edit Screen
The One-Time Schedule Add/Edit screen allows you to define a one-time schedule or edit an
existing one. To access this screen, go to the Schedule screen (see Section 30.2 on page 397), and
click either the Add icon or an Edit icon in the One Time section.
Figure 261 Configuration > Object > Schedule > Edit (One Time)
The following table describes the labels in this screen.
Table 151 Configuration > Object > Schedule > Edit (One Time)
LABEL DESCRIPTION
Configuration
Name Type the name used to refer to the one-time schedule. You may use 1-31 alphanumeric
characters, underscores(
_), or dashes (-), but the first character cannot be a number.
This value is case-sensitive.
Date Time
StartDate Specify the year, month, and day when the schedule begins.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
StartTime Specify the hour and minute when the schedule begins.
• Hour - 0 - 23
• Minute - 0 - 59
StopDate Specify the year, month, and day when the schedule ends.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
StopTime Specify the hour and minute when the schedule ends.
• Hour - 0 - 23
• Minute - 0 - 59
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving your changes.