Filter
Top Products
Chapter 6 Storage Screens
NSA-220 User’s Guide
75
" Creating a volume formats the hard drive. All data on the disk will be lost.
Figure 60 System > Storage > Create an Internal Volume
The following table describes the labels in this screen.
Table 16 System > Storage > Create an Internal Volume
LABEL DESCRIPTION
Volume Name Type a volume name from 1 to 31 characters. The name cannot be the same as
another existing external volume.
Acceptable characters are all alphanumeric characters and " " [spaces], "_"
[underscores], and "." [periods].
The first character must be alphanumeric (A-Z 0-9).
The last character cannot be a space " ".
For an external volume, type a volume name from 1 to 32 single-byte (no Chinese
characters allowed for example) ASCII characters. The name cannot be the same
as another existing external volume.
JBOD Use JBOD if you want maximum storage capacity and/or you have other means of
protecting your data. JBOD is the only option if you only have one disk installed.
With two disks, you can choose to create a JBOD volume on one of the disks or
both.
RAID 0 Use RAID 0 if you want maximum speed for your disks, and/or you have other
means of protecting your data. This is only available when you have two hard disks
installed.
RAID 1 Use RAID 1 if you want to mirror all data on one disk to the other disk. This is only
available when you have two hard disks installed.
Volume will be
created on
This field lists all hard disks installed inside the NSA. Select which disks should
make up this volume. A disk can only belong to one volume. You do not need to
select anything if only one hard disk is installed.
Apply Click this button to save your changes back to the NSA and create the volume.
Cancel Click this button to exit this screen without saving your changes or creating a
volume.