Filter
Top Products
Galaxy GHDX2-2430S/R-24F4D Installation and Hardware Reference Manual
Hardware Installation
2-12
Figure 2-7: Package Contents
The rackmount rails secure the Galaxy 4U chassis to standard 19-inch wide, four-post
cabinets or racks that are between 23 and 36 inches deep. These heavy-duty
rackmount rails provide an easy and safe access to the subsystems as well as a solid
support.
Prepare the tools needed to install the enclosure into rack. The following
should be necessary:
• A medium-sized cross-head screwdriver.
• A small-sized cross-head screwdriver.
• A medium-sized flathead screw driver.
2.7.2 Installation Steps
Step 1. Determine the exact position where you want to install the
Galaxy RAID enclosure in the rack, and then measure the
position.
Step 2. The mounting kit comes with M5 cage nuts that can be used
with racks that have square, unthreaded holes. Align the front
edge of a support bracket against a rack post and adjust spacing